The Sunday series is simply a collection of club races, but with points scored to keep it interesting. It is a great way to test, practice and compete leading up to larger events later this year. We will be racing every four weekends on Sundays. This works well to avoid local conflicts with other RC facilities and allows us to travel to other tracks in between. There will be four scheduled events, all leading up to the West Coast On-Road Nationals in late May. Each weekend also brings us an open practice day each Saturday. Many drivers will be out there both days or just one. We all know practice days can be more beneficial than race days sometimes. So, enjoy the best of both worlds.


Event Information:
- All 1/10th and 1/12th scale electric cars welcome.
- Tables, chairs and power provided. Cover also provided with sufficient help before and after.
- Saturday practice fee: $20 per driver
- Sunday race entry fees: $20/$10/$10 per class.
- Available race day classes: Three cars make a class (See class rules below)
- Two rounds of qualifying with single mains with bump-ups for all classes.
- Points system: (standard – see below).
- Rainouts and/or cancelled events: We may not re-run a cancelled event due to scheduling conflicts.

Weekend Schedule
Saturday is practice day
7:00 AM Gate opens
8:30 AM Track opens
4:00 PM Track closes
4:30 PM Gate closes
Sunday is race day!
7:00 AM Gate opens
8:00 AM Track opens
10:30 AM Racing begins
*Post race practice available*



Event Details
- Track Owner: David Mayhew
- Track Manager: Ryan Doyel
- Race Director: Jimmy Ray
- Two rounds of five-minute qualifying for all classes.
- Single, five-minute mains for all with lower main bump-ups.
General rules and expectations: Let’s keep it simple and fair.
- Have fun! The goal of a JRRC hosted event is to have each and every driver want to come back to the next event.
- Corner-marshalling immediately after your race or by your designee is required and keep us on schedule.
- Post race tech inspection may be administered at any time by the director or track manager to ensure rule follow-through.
- Working MyLaps 2 wire and 3 wire transponders are required to be scored.
- Please keep your pit area and the facility clean.
Etiquette and sportsmanship matters.
- Be good sports. No cussing at, yelling at or insulting others please.
- In practice and qualifying let faster cars pass quickly and as cleanly as possible. Also in mains when not racing for position. Conversely, the passing driver needs to attempt the pass without forcing contact.
- Incidents happen, drivers clearly at fault should hold off the racing line for the other car/s involved to continue. Failure to do so may result in a stop and go penalty mid-race. If instructions are not followed, it could be a loss of a lap or position in the results.
- Call-out wrecks verbally in practice and warm-up laps. If you are stopped on the track notify all other drivers on the stand if the director does not.
Class specific rules
- 1/12 Scale
Weight: 730 grams
Battery Voltage: ROAR 1s approved hard case lipo. 4.20 volts max
Tire: Open foam tire
Body: Open GTP or LMP style body (no GT12 bodies)
Motor: Any ROAR approved 13.5 motor
ESC: Any ROAR approved ESC in “blinky” mode - All 17.5 Touring Car & 21.5 Touring Car Classes
Weight: 1320 grams
Tires: Open Rubber TC: (Sweep 36D Spec available trackside)
Body: Open Touring Car body
Battery Voltage: Any ROAR approved hard case lipo. 8.40 volts max
ESC: Any ROAR approved ESC in “blinky” mode
Motor: Any ROAR approved 21.5 or 17.5 motor respective to class - Eurotruck (TCS Rules will be enforced from https://www.tamiyausa.com/tcs/rules/)
16.1 Legal kits: Item 58632 Team Hahn Racing MAN TGS, 58642 Team Reinert Racing MAN TGS, 58661 Buggyra Racing Fat Fox, and 58683 Tankpool24 Mercedes Actros
-16.2 The kit must be built EXACTLY per the instruction manual.
-16.3 Hop-Up-Options: The ONLY Hop-Op Options allowed are: Ball Bearings (ANY BRAND), Tamiya CVA Mini Shock Unit Set 4 pcs. Item #53619, and any Tamiya servo saver. Note: TAMIYA CVA oil filled dampers must use the kit supplied springs from the Euro Truck Kit. Any silicone shock oil may be used for the dampers.
-16.4 Gearing: Must use the stock pinion and spur gear. (61-Tooth Spur, item 51004, 19-Tooth Pinion, item 50355)
-16.5 ESC: Must use the kit supplied Tamiya TBLE-02S/TBLE-04S ESC or THW-1060 Brushed Motor ESC (2-3S) Hobbywing OEM-Same as QUICRUN 1060 BRUSHED ESC (2-3S).
-16.6 MOTOR: Must use the kit supplied motor. (item 54358 RS-540 Torque-Tuned Motor)
-16.7 Battery connector on ESC may be changed to DEANS T-Type or XT-60.
-16.8 The Bullet Connectors may not be removed from the ESC or motor.
-16.9 The ESC & Motor wires may not be shortened or removed!
-16.10 All polycarbonate body parts must be used.
-16.11 All attachment screws in the kit must be used to secure all parts. You may not omit screws to change the handling of the truck. NOTE: The plastic motor cover, (part D8) directly over the motor, does not need to be used. It’s optional.
-16.12 Minimum weight: NONE. Also, NO weights, of ANY KIND, may be put on the truck for ballast.
-16.13 Adding FOAM material to the kit foam bumper is allowed. You may also use TAMIYA item 54819 Urethane Bumper XL in place of the stock size bumper.
-16.14 Tires: Must use kit type tires, and wheels. Note: TIRE INSERTS OF ANY KIND ARE NOT PERMITTED.
-16.15 LUBRICATION: Any GREASE, or LUBRICANT may be used to lubricate gears, or moving parts.
-16.16 Gear Diff Tuning Rules: Both front & rear gear diffs MUST rotate in the opposite direction when physically turning opposing wheels.
TEST METHOD USED: When holding the main center drive shaft, connecting the front and rear gearboxes, stationery, the wheel on the opposite side of the one being rotated must rotate in the opposite direction. The diff will be considered locked if opposing wheels turn in the same direction, therefore considered not legal to race on track. Locking the diff with putty, ear plugs, or HIGH viscosity grease is not allowed.
-16.17 It’s allowed to mix & match front/rear wheel position on the truck for durability.
-16.18 Battery: Any stick-pack type, hard round case LiPo, NiCD, or Ni-MH is allowed. Examples: Reedy Wolf-Pack, Peak Racing, ProTek-RC, and Powermax batteries. - Formula 1
Weight: 1020 grams
Battery Voltage: ROAR approved hard case lipo. 8.40 volts max
Tire: Open rubber tire
Body: Bodies must resemble open wheel, single seat cars used in CART, IRL, Formula One or other similar full-size series.
Motor: Any ROAR approved 25.5 motor
ESC: Any ROAR approved ESC in “blinky” mode - Front Wheel Drive
Any 1/10 2WD/FWD chassis, 4-wheel independent suspension
Hobbywing 17.5t JUSTOCK esc/motor fixed timing combo from Hobbywing only.
Battery Voltage: Any ROAR approved hard case lipo. 8.40 volts max
Open FDR
Weight: 1250 grams
Body: Must be a FWD vehicle
Tires: RIDE 24mm treaded USGT Tires or Gravity USGT Tires on spoke/mesh wheels. Pre-mounts only. - LMH
Weight: 1320 grams
Tires: Open Rubber Spoke TC: Decals okay. (Sweep 36D Spec available trackside)
Body: LMH (Le Mans Hypercar)
Battery Voltage: Any ROAR approved hard case lipo. 8.40 volts max
ESC: Any ROAR approved ESC in “blinky” mode
Motor: Any ROAR approved 13.5 motor - Modified Touring Car
Weight: 1320 grams
Tires: Sweep 36D Spec (Available/marked trackside)
Body: Open Touring Car body
Battery Voltage: Any ROAR approved hard case lipo. 8.40 volts max
ESC: Any ROAR approved ESC
Motor: Open - Porsche Cup
TT01, TT02 or TT02R chassis only. S or SRX not allowed.
Any Tamiya or other brand TT01/TT02 hopup allowed.
No modifications to tub chassis or internal gearing is allowed.
Ride or Motiv/Gravity USGT tires are spec tires. No Other TC type tires are allowed.
HW Justock fixed timing ESC only (30112005).
HW fixed timing 21.5 (30408012) or Reedy FT 21.5 (ASC297) motors only.
Porsche 911 GT3 (992) and Carrera 911 Tamiya bodies only.
Tamiya brand optional wings only.
Open gearing. Tamiya aluminum standard and high-speed motor mounts ok. Yeah racing adjustable motor mount ok.
1400 gram minimum weight. - Pro 10
Weight: 930 grams
Battery Voltage: ROAR approved hard case lipo. 8.40 volts max
Tire: Open foam tire
Body: Open GTP or LMP style body
Motor: Any ROAR approved 17.5 motor
ESC: Any ROAR approved ESC in “blinky” mode - USGT
Rules can be found at www.usvintagetransam.com
Weight: 1350 grams
Body: Open USGT style body
Battery: Any ROAR approved hard case battery. 8.40 volts max
Motor: Any ROAR approved 21.5 motor
ESC: Any ROAR approved ESC in “blinky” mode
Tires: Open RIDE 24mm Treaded USGT Tires or Gravity USGT Tires on spoke/mesh wheels. Premounts only. - VTA
Rules can be found at www.usvintagetransam.com
Weight: 1400 grams
Tire: Any Protoform or Gravity vintage style wheels are acceptable.
PROTOform VTA Rear Tires (31mm) – #10139-00 and PROTOform VTA Front Tires (26mm) – #10140-00 or Gravity RC VTA Tires.
Body: See body list on USVTA website. 3D Interiors are required per USVTA rules.
Battery Voltage: 6000 mAh limit, 8.40 volts max
ESC: Any ROAR approved ESC in “blinky” mode
Motor: Any ROAR approved 25.5 motor. No physical alterations can be made to the motor.
Nearby Lodging
Holiday Inn & Suites Bakersfield
3927 Marriott Drive, Bakersfield, Ca 93308
(661) 377-8000
WoodSpring Suites Bakersfield Airport
8740 Spectrum Park Way Bakersfield, Ca 93308
866-994-9836

Contact us

Ryan Doyel
Fees and track management
[email protected]

Jimmy Ray
Race directing
[email protected]
Finishline RC Raceway – 34790 Lencioni Ave Bakersfield,CA